Firewood Cord Calculator (Cords, Face Cords and Ricks)
Measure a neatly stacked pile of firewood and enter its length, height and piece length. The calculator shows how many full cords (128 cu ft), how many face cords of that piece length, and the cubic feet and cubic meters. Add what you paid to compare prices per full cord.
What to measure
Worked example: A neat stack 8 ft long and 4 ft high of 16 in pieces, three rows deep: depth = 16 × 3 ÷ 12 = 4 ft, so 8 × 4 × 4 = 128 cu ft = 1 full cord = 3 face cords = 3.62 m³.
Face cord quick table
A face cord (also sold as a rick, stove cord or furnace cord) is a stack 4 ft high and 8 ft long, one piece deep. Its size depends on the piece length:
| Piece length | Face cord volume | Share of a full cord | Face cords per full cord |
|---|---|---|---|
| 12 in (30 cm) | 32.0 cu ft (0.91 m³) | 1/4 (0.250) | 4.00 |
| 16 in (41 cm) | 42.7 cu ft (1.21 m³) | 1/3 (0.333) | 3.00 |
| 18 in (46 cm) | 48.0 cu ft (1.36 m³) | 3/8 (0.375) | 2.67 |
| 20 in (51 cm) | 53.3 cu ft (1.51 m³) | 5/12 (0.417) | 2.40 |
| 24 in (61 cm) | 64.0 cu ft (1.81 m³) | 1/2 (0.500) | 2.00 |
Full cord: 4 × 4 × 8 ft = 128 cu ft = 3.62 m³ (NIST Handbook 130). Half cord: 4 × 4 × 4 ft = 64 cu ft. The 12, 16 and 24 in rows match the New Jersey Forestry Association figures (1/4, 1/3 and 1/2 cord).
How it works
Stacked volume (cu ft) = stack length × height × depth, where depth = piece length (in) × rows ÷ 12. Full cords = cubic feet ÷ 128, because NIST Handbook 130 defines a cord as the wood in 128 cu ft (4 × 4 × 8 ft) when it is "ranked and well stowed": pieces in rows, touching, parallel and stacked compactly. A face cord is 4 ft high × 8 ft long × one piece length, so one face cord = 32 × piece length ÷ 12 cu ft, which is piece length ÷ 48 of a full cord. Cubic meters = cubic feet × 0.0283168 (NIST). Price per cord = price paid ÷ cords. If you measured in inches, the University of Missouri Extension shortcut is length × width × height (all in inches) ÷ 221,000 = cords (the exact divisor is 128 × 1,728 = 221,184).
More worked examples
- One row of 16 in pieces, 8 ft long and 4 ft high (a typical face cord or rick): 8 × 4 × 1.333 = 42.7 cu ft = 0.333 cord (1.21 m³). If it costs $150, that is $150 ÷ 0.333 = $450 per full cord.
- A stack 12 ft long and 5 ft high of 18 in pieces, one row: 12 × 5 × 1.5 = 90 cu ft = 0.703 cord, or 1.875 face cords of 18 in wood.
- Measured in inches, 96 × 48 × 48 in = 221,184 cubic inches ÷ 221,184 = 1 cord (University of Missouri Extension rounds the divisor to 221,000).
- Metric: a stack 2.4 m long, 1.2 m high and 40 cm deep is 1.152 m³ = 40.7 cu ft = 0.318 cord.
How to measure
- Stack the wood neatly first: pieces parallel, touching and tightly packed. Do not measure wood piled loosely in a truck bed; the University of Missouri Extension advises measuring after it is stacked.
- Measure the length of the stack along the ground, end to end.
- Measure the height at three or more points along the stack and use the average.
- Measure the length of several pieces and use the average piece length. If the stack is more than one row deep, count the rows (or measure the full depth and enter it as the piece length with 1 row).
- For a stack with uneven ends, measure the length at mid-height.
Common mistakes
- Calling a face cord a cord. A face cord of 16 in wood is only one-third of a full cord.
- Measuring a thrown or crisscrossed pile. NIST's definition requires wood ranked and well stowed; loose piles have much more air.
- Using the height at the tallest point. Stacks settle and slope; use an average.
- Comparing prices for "a rick" or "a load" without converting to cords. Work out the price per full cord.
- Forgetting the piece length. Two face cords of 12 in and 24 in wood differ by a factor of two.
Assumptions
- The stack is neat and compact, with pieces parallel and touching, as in NIST's "ranked and well stowed" definition. A crisscrossed, loose or thrown pile holds less wood than its outside size suggests.
- Height is the average height of the stack; measure it at several points because stacks settle and are rarely level.
- Volume is the space the stack fills, not solid wood. A cord holds roughly 75-90 cu ft of solid wood and bark; the rest is air (NJ Forestry Association; OSU Extension says rarely over 90 cu ft).
- "Face cord", "rick", "stove cord" and similar terms are not standard sizes: their meaning depends on piece length and region. University of Missouri Extension says a rick ranges from about 1/3 to 2/3 of a cord. This page treats a face cord or rick as a 4 × 8 ft face one piece deep.
- Firewood sales rules are set by each state. NIST Handbook 130 is a model regulation: it says wood should be sold by the cord and fractions of a cord or by the cubic meter, and lists terms such as face cord and rick as not to be used in sales. Check your own state's weights and measures office if a sale is disputed.
- Weight, moisture content and heat value are not estimated; they vary a lot by species and drying.
Frequently asked questions
How big is a cord of firewood?
A full cord is 128 cubic feet of neatly stacked wood: 4 ft high × 4 ft deep × 8 ft long. NIST Handbook 130 defines the cord as the wood contained in 128 cu ft when "ranked and well stowed". A 2 × 4 × 16 ft stack is also 128 cu ft.
What is a face cord of wood?
A stack 4 ft high and 8 ft long but only one piece deep. With 16 in pieces it is 42.7 cu ft, one-third of a full cord; with 24 in pieces it is half a cord; with 12 in pieces a quarter (New Jersey Forestry Association).
Is a rick the same as a face cord?
Often, but not always. University of Kentucky Extension says a rick and fireplace cord usually mean about one-third of a cord but vary by region, and University of Missouri Extension has seen ricks from 1/3 to 2/3 of a cord. Ask the seller for the length, height and piece length, then use this calculator.
How many face cords are in a full cord?
48 ÷ piece length in inches: three face cords of 16 in wood, two of 24 in wood, four of 12 in wood.
How much solid wood is in a cord?
Usually about 75-90 cu ft out of the 128 cu ft; the rest is air and bark. Straight, split, tightly stacked pieces hold more wood (NJ Forestry Association, OSU Extension).
How do I compare firewood prices?
Convert each offer to a price per full cord: price ÷ cords. For example, a face cord of 16 in wood for $150 is 1/3 cord, so $450 per full cord.
Related calculators
- Space heater running cost calculator – to compare with electric heat
- Room heating BTU calculator – to size heat for a room
- Cubic yards and cubic feet calculator – to convert cords to cubic yards (1 cord = 4.74 cu yd)
- Board foot calculator – for lumber volume
- Christmas lights calculator – for other seasonal projects
Sources
Formulas and reference values are from these sources. Page content last updated 2026-10-27.
- NIST Handbook 130 (2026), Section IV-B, 2.4 Fireplace and Stove Wood (cord = 128 cu ft ranked and well stowed; sale by cord or cubic meter)
- Oregon State University Extension EC 1127: Measuring timber products (cord 4 × 4 × 8 ft = 128 cu ft; rick or short cord; rarely over 90 cu ft of solid wood)
- New Jersey Forestry Association, Forestry Notes: Buying and selling firewood (face cord with 24, 16 and 12 in pieces = 1/2, 1/3, 1/4 cord)
- University of Missouri Extension: Calculating cordwood correctly (inches L × W × H ÷ 221,000 = cords; a rick is 1/3 to 2/3 cord)
- University of Kentucky Forestry and Natural Resources Extension: Measuring and stacking firewood (face cord, rick, about 85 cu ft of wood per cord)
- NIST Guide to the SI (SP 811), Appendix B.9: conversion factors (foot = 0.3048 m, ton, pound)