Space Heater Running Cost Calculator
Enter the heater's wattage (on the label; most portable electric heaters are 1,500 W on high), how long it runs and the electricity rate from your bill. The result is the energy used and an estimated cost per hour, per day and for the period you choose.
Space heater cost quick table
1,500 W on high and 750 W on low, running 8 hours a day for 30 days, with the heating element on the whole time:
| Your rate (per kWh) | 1,500 W per hour | 1,500 W per day (12 kWh) | 1,500 W per 30 days (360 kWh) | 750 W per 30 days (180 kWh) |
|---|---|---|---|---|
| 10¢ | $0.150 | $1.20 | $36.00 | $18.00 |
| 15¢ | $0.225 | $1.80 | $54.00 | $27.00 |
| 20¢ | $0.300 | $2.40 | $72.00 | $36.00 |
| 25¢ | $0.375 | $3.00 | $90.00 | $45.00 |
| 30¢ | $0.450 | $3.60 | $108.00 | $54.00 |
These rates are examples, not current prices. A heater with a thermostat that cycles off uses less than the table shows.
How it works
Energy per day (kWh) = watts × number of heaters × hours per day × share of time on ÷ 1,000. This is the formula in Virginia Cooperative Extension's appliance energy guide (wattage × hours used per day ÷ 1,000 = daily kWh), with the share of time on added for heaters whose thermostat cycles the element off. Energy for the period = daily kWh × days. Cost = kWh × your rate (cents ÷ 100). Amps = watts ÷ volts (P = V × I). Heat output: 1 W = 3.412 Btu per hour, because 1 kWh = 3,412 Btu (U.S. EIA).
Worked examples
- A 1,500 W heater on high for 8 hours a day for 30 days at 15¢ per kWh: 1,500 × 8 ÷ 1,000 = 12 kWh a day × 30 = 360 kWh × $0.15 = $54.00, or $1.80 a day and 22.5¢ an hour.
- Same heater on its 750 W low setting: 6 kWh a day, 180 kWh in 30 days, $27.00 at 15¢.
- 1,500 W heater with a thermostat that keeps the element on about half the time (50%): 6 kWh a day, $27.00 for 30 days at 15¢.
- Two 1,500 W heaters, 5 hours a day for 31 days at 22¢: 3 kW × 5 h = 15 kWh a day, 465 kWh, $102.30.
- Virginia Cooperative Extension's own example of the formula: a 200 W window fan × 4 hours a day × 120 days ÷ 1,000 = 96 kWh; at 8.5¢ per kWh, $8.16 a year.
How to measure
- Find the wattage on the heater's label (often on the back or bottom). If it only lists amps, multiply amps by volts (120 V for most U.S. plug-in heaters).
- Note which setting you use. Many heaters have a low (often 750 W) and high (often 1,500 W) setting.
- Estimate hours per day honestly, or use a timer. For thermostat models, a plug-in energy meter shows the real kWh used.
- Find your rate on your electric bill and enter it in cents per kWh.
Common mistakes
- Entering the rate in dollars (0.15) instead of cents (15). This calculator uses cents per kWh.
- Assuming a "high efficiency" electric heater uses fewer watts for the same output. All electric resistance heat turns 1 W into 3.412 Btu/h; the label wattage decides the cost.
- Counting hours the heater is plugged in but cycled off. Use the share-of-time setting or an energy meter.
- Ignoring the main heating system. A space heater saves money only if you turn the rest of the house down.
- Running a heater on an extension cord or power strip. CPSC advises plugging it directly into a wall outlet.
Assumptions
- Power is the heater's rated wattage from its label. Virginia Cooperative Extension lists portable heaters at 750-1,500 W; check your own model.
- Share of time on defaults to 100%, the maximum cost. A heater with a thermostat cycles off once the room is warm; if you know how much it runs, lower the percentage.
- The rate is your own price per kWh from your electricity bill (energy charges divided by kWh used). The 15¢ default is only an example, not a current average. The U.S. EIA publishes average residential prices by state if you need a starting point.
- Fixed monthly charges, tiered or time-of-use rates, taxes and demand charges are not modeled.
- Every electric resistance heater turns all the electricity it uses into heat (U.S. DOE), so two heaters with the same wattage cost the same to run at the same setting; size and design change how the heat is spread, not the watts used.
- Safety: CPSC advises plugging space heaters directly into a wall outlet, never an extension cord or power strip, keeping them at least 3 ft from anything that can burn, and turning them off when sleeping. This page does not assess wiring or circuits.
Frequently asked questions
How much does it cost to run a 1,500 watt space heater?
1,500 W is 1.5 kWh per hour. At 15¢ per kWh that is 22.5¢ an hour, $1.80 for 8 hours and $54 for 30 days of 8 hours a day if it runs the whole time. Multiply 1.5 by your own rate for the hourly cost.
How many kWh does a space heater use?
Watts × hours ÷ 1,000. A 1,500 W heater uses 1.5 kWh per hour, 12 kWh in 8 hours and 360 kWh over 30 such days. On a 750 W low setting it is half that.
Do space heaters use a lot of electricity?
A 1,500 W heater on high uses as much power as fifteen 100 W loads at once, so running it many hours adds up. Whether it saves money depends on what else you are heating: it can save if you turn down the main heat and warm only the room you are in.
How many amps does a space heater draw?
Watts ÷ volts: 1,500 W ÷ 120 V = 12.5 A, and 750 W ÷ 120 V = 6.25 A. CPSC advises plugging space heaters straight into a wall outlet, not an extension cord or power strip.
How do I find my electricity rate?
On your bill, divide the energy charges by the kWh used, or use the price per kWh printed on it. Enter it in cents (for example 15 for $0.15). EIA's table of average residential prices by state is a fallback if you do not have a bill.
How many Btu does a 1,500 W heater put out?
About 5,118 Btu per hour: 1,500 × 3.412. That is roughly the heat a 28 Btu per sq ft rule of thumb suggests for a 183 sq ft room; see the room heating BTU calculator.
Related calculators
- Room heating BTU calculator – to see how much heat a room may need
- kW to kWh calculator – for energy from power and time
- Watts, volts and amps calculator – to convert amps on a label to watts
- kWh to BTU converter – to compare with gas or other fuels
- Insulation calculator (R-value) – to cut the heat a room loses
- Firewood cord calculator – if you heat with wood
- Electrical & power calculators – Ah, watts, kW, kWh, voltage drop and home heating power tools
Sources
Formulas and reference values are from these sources. Page content last updated 2026-10-26.
- Virginia Cooperative Extension BSE-301: Estimating appliance and home electronic energy use (Wattage × hours ÷ 1,000 = daily kWh; portable heater 750-1,500 W)
- U.S. DOE Energy Saver: Electric resistance heating (100% of incoming electric energy converted to heat; archived January 2026 copy, the live page has been removed)
- U.S. EIA: Energy conversion calculators (1 kWh = 3,412 Btu)
- U.S. EIA Electric Power Monthly, Table 5.6.A: Average price of electricity to ultimate customers by state (residential, cents per kWh)
- U.S. CPSC (January 2026): Keep warm and safe this winter (plug space heaters directly into a wall outlet; keep 3 ft from combustibles)
- NIST SP 330 (2019): The International System of Units (watt = J/s, volt = W/A)