Room Heating BTU Calculator (Rough Estimate)
Enter the room's length and width for a rough estimate of the heat output, in Btu per hour, a room heater might need. It uses a simple rule of thumb from university extension guides, so treat it as a starting point: sizing a furnace, boiler or heat pump needs a proper load calculation (ACCA Manual J) by a qualified professional.
What to measure
Worked example: University of Nebraska-Lincoln Extension's example: a 20 × 20 ft room is 400 sq ft × 28 = 11,200 Btu per hour. That is 11,200 ÷ 3.412 = about 3,282 W (3.28 kW), a little more than two 1,500 W heaters' worth.
Room heating BTU quick table (28 Btu per sq ft)
| Room | Rough heat estimate | Electric equivalent |
|---|---|---|
| 10 × 10 ft (100 sq ft, 9.3 m²) | 2,800 Btu/h | 0.82 kW |
| 10 × 12 ft (120 sq ft, 11.1 m²) | 3,360 Btu/h | 0.98 kW |
| 12 × 12 ft (144 sq ft, 13.4 m²) | 4,032 Btu/h | 1.18 kW |
| 12 × 15 ft (180 sq ft, 16.7 m²) | 5,040 Btu/h | 1.48 kW |
| 15 × 20 ft (300 sq ft, 27.9 m²) | 8,400 Btu/h | 2.46 kW |
| 20 × 20 ft (400 sq ft, 37.2 m²) | 11,200 Btu/h | 3.28 kW |
| 20 × 25 ft (500 sq ft, 46.5 m²) | 14,000 Btu/h | 4.10 kW |
28 Btu per hour per sq ft is the rule of thumb in University of Nebraska-Lincoln and University of Kentucky Extension guides for choosing a room heater. It is a rough starting point, not a heat-loss calculation.
How it works
Heat needed (Btu per hour) ≈ floor area (sq ft) × Btu per sq ft. The University of Nebraska-Lincoln Extension NebGuide on space heaters says to estimate Btu requirements by taking the square feet of floor area to be heated times 28, with the example of a 20 × 20 ft room: 400 sq ft × 28 = 11,200 Btu/h. University of Kentucky Extension gives the same rule (18 × 20 ft × 28 = 10,080 Btu). Watts = Btu per hour ÷ 3.412, because 1 kWh = 3,412 Btu (U.S. EIA); kW = watts ÷ 1,000.
More worked examples
- University of Kentucky Extension's example: an 18 × 20 ft room, 360 sq ft × 28 = 10,080 Btu/h, which it rounds to a 10,000 Btu heater.
- A 12 × 12 ft bedroom: 144 sq ft × 28 = 4,032 Btu/h = about 1,182 W, within one 1,500 W heater's 5,118 Btu/h.
- Metric: a 4 × 5 m room is 20 m² = 215.3 sq ft × 28 = about 6,028 Btu/h = 1.77 kW.
How to measure
- Measure the room's length and width at floor level, wall to wall.
- For an L-shaped room, split it into rectangles, work out each area with the square footage calculator, and enter the total as length × 1.
- Note anything that makes the room harder to heat (many windows, outside walls, high ceilings, poor insulation). This rule of thumb does not account for them.
Common mistakes
- Using a room-heater rule of thumb to size a furnace, boiler or heat pump. DOE warns this leads to oversized systems; get a Manual J calculation.
- Buying a bigger heater than the room needs. The extension guides advise matching the heater to the room.
- Ignoring insulation, windows and ceiling height. Two rooms of the same floor area can need very different amounts of heat.
- Mixing up Btu (energy) and Btu per hour (heating rate). Heater outputs are Btu per hour.
- Plugging a space heater into an extension cord or power strip. CPSC advises a wall outlet.
Assumptions
- 28 Btu per hour per sq ft is a single rule-of-thumb number from extension guides written for picking a room space heater. It does not change with climate, insulation, windows or ceiling height.
- We have not added climate or insulation presets because we could not find a public source we trust for specific Btu-per-sq-ft figures by climate. You can change the number, but any value is a guess; the real heat loss of a room depends on its walls, windows, air leaks and the outdoor design temperature.
- The U.S. DOE says rules of thumb are too often used to size heating and cooling systems and lead to oversized systems; it points to ACCA Manual J load calculations. Use this page for a rough room-heater comparison only, not to size a furnace, boiler or heat pump.
- Electric equivalent assumes electric resistance heat, which turns each watt into 3.412 Btu per hour. Heat pumps and fuel-burning heaters are rated differently.
- Safety: CPSC advises plugging electric space heaters directly into a wall outlet and keeping them at least 3 ft from anything that can burn. Unvented fuel-burning heaters need ventilation; follow the maker's instructions and local codes.
Frequently asked questions
How many BTU do I need per square foot?
A common extension rule of thumb for a room heater is 28 Btu per hour per sq ft (University of Nebraska-Lincoln and University of Kentucky Extension). It is rough: well-insulated rooms may need less and drafty or cold-climate rooms more, which is why heating systems are sized with a Manual J calculation.
How many BTU to heat a 20 × 20 room?
400 sq ft × 28 = 11,200 Btu per hour by the extension rule of thumb, about 3.3 kW of electric heat.
How many BTU to heat a 12 × 12 room?
144 sq ft × 28 = 4,032 Btu per hour, about 1.2 kW. One 1,500 W electric heater gives about 5,118 Btu/h.
How much area will a 1,500 W heater heat?
1,500 W × 3.412 = about 5,118 Btu/h. At 28 Btu per sq ft that matches about 183 sq ft, but only as a rough guide; insulation and climate change it a lot.
Can I size a furnace or heat pump with this?
No. The U.S. DOE says rules of thumb lead to oversized systems and points to ACCA Manual J. Ask a qualified HVAC contractor for a Manual J load calculation for the whole house.
How do I convert BTU per hour to watts?
Divide by 3.412: 11,200 Btu/h ÷ 3.412 = about 3,282 W. To go the other way, multiply watts by 3.412.
Related calculators
- Space heater running cost calculator – to estimate what the heater costs to run
- Insulation calculator (R-value) – to reduce heat loss through the attic
- kWh to BTU converter – for energy unit conversions
- Square footage calculator – for room area
- Firewood cord calculator – for wood heat
- Electrical & power calculators – Ah, watts, kW, kWh, voltage drop and home heating power tools
Sources
Formulas and reference values are from these sources. Page content last updated 2026-10-27.
- University of Nebraska-Lincoln Extension NebGuide G83-664: Space heaters, safe or unsafe? (floor area × 28 = Btu per hour; 20 × 20 ft room = 11,200 Btu/h)
- University of Kentucky Cooperative Extension AEES-35: Kerosene heaters (rule of thumb: square feet × 28; 18 × 20 ft = 10,080 Btu)
- U.S. DOE Building Science Education: Proper sizing of HVAC systems (rules of thumb lead to oversizing; use ACCA Manual J load calculations)
- ACCA: Manual J residential load calculation
- U.S. EIA: Energy conversion calculators (1 kWh = 3,412 Btu)
- U.S. DOE Energy Saver: Electric resistance heating (100% of incoming electric energy converted to heat; archived January 2026 copy, the live page has been removed)
- U.S. CPSC (January 2026): Keep warm and safe this winter (plug space heaters directly into a wall outlet; keep 3 ft from combustibles)